搜索
查看: 51015|回复: 123

[下载]Booster全系列收藏!(2005.08.28更新)

[复制链接]
发表于 2004-8-4 20:13:21 | 显示全部楼层 |阅读模式 来自 中国–宁夏–银川
booster_lite_mm-1.13
booster_lite_mm-source-1.13
booster_mm-1.36
booster_mm-1.70
booster_source-1.70
booster20
booster21
booster22
booster22_source
booster231
booster231_source
booster235
booster235_source
booster240

[HISTORY]

[2.40]
* Added the ability for Booster to ping an external machine and record the value. This can help admins diagnose latency problems. Value is stored in booster_extping. IP address to ping is stored in booster_pingaddr.
* Added a cvar to hold average player ping. Value is stored in booster_intping.
* Added 'booster_status' console command, which reports on CPU, entities used, FPS and pings.
* Re-introduced the 686/p4 optimized build.

[2.35]
* Fixed a bug in stats collection where cpu was being reported correctly (only affected statsdat.dat creation).
* Added a filter to excluded pings > 1000 from ping averages.
* Booster plugin defaults are now in line with values in default cfg sample.

[2.31]
* Fixed a bug that caused 2.3 to shut down after 4 seconds.
* Added '-nolite' commandline option to remove Booster-Lite function swapping for those who might need it (rare).

[2.3]
* Added 'booster_cpu_floor' to help better manage CPU monitoring/sleep timer management.
* Revised the build optimizations. Eliminated multiple processor builds.

[2.2]
* Added booster_trigger_cmd cvar, which is executed as a server command the first time booster_cpu_spikemax is tripped.
* booster_cpu_enabled is automatically turned off (set to 0) if Booster cannot read the CPU performance monitor.
* Booster will prevent itself from being loaded on a Listenserver.
* Changed the build optimizations. booster_mm.dll is not optimized. booster_586_mm.dll is for the 586 family, and booster_p4_mm.dll is for the P4 family.

[2.1]
* Added cvars to allow cpu statistics counter (and others) to be changed (to support non-English counter names and multi-processor machines).
* Amended the documentation to include booster_stats cvar.

[2.0]
* Combined WinHL-Booster and Booster-Lite
* Added cvar compatibility checks

[1.70]
* Switched back to 1.50beta source (all 1.60 changes are removed).
* Removed TOS tweak.

[1.60]
* uses kernel timer tweak now on Windows NT4/2000/XP/2003
- no longer cause system wide timer accurency change
* similiar changes on Windows 95/98/ME
- only enables higher accurency just before sleeping and disables right after

[1.50beta]
* WinHL-Booster can monitor CPU usage and automatically manage the sleep timer to balance between FPS and CPU utilization (by Buzz_Kill <buzzkill@100acrebloodbath.com>)
* Added TOS low delay tweak, "-tos" commandline option for activating TOS tweak

[1.46]
* booster_force_systicrate is set to 10000 by default now
* made filesize bigger (don't ask)

[1.45 beta]
* booster_minsleepms cvar for adjusting sleep timer tweak

[1.44]
* booster_autofps 100 for better ping and better server stability

[1.43]
* Oh .. did I skip 1.43 .. oops I think I did

[1.42]
* Name changed back to WinHL-Booster
* sets sys_ticrate to 10000 instead of 1000. Seems to help ping problems that booster causes on some servers.

[1.41]
* removed url from connmessages

[1.40]
* !! Makes server run with higher fps than 100 !!
- Uses multimedia timer tweaking of Windows
- Same effect than with flash-ani trick
- OS wide effect .. only one server running booster -> all servers boosted

* No more Linux binary (sorry .. no mm timer tweak in linux that I know off (You might want to try multimedia timer tweaked kernel(search net))))
* Connection message can be disabled

* Removed all extra stuff that were causing more bad than good
- Underrun &pound;@&$ removed
- Dynamic sys_ticrate adjusting for fps removed
- Cleaned connection messages from extra crap removed

[1.36b]
* New installation directories in booster_mm.txt (http://www.unitedadmins.com/info_addon_dev_standards.aspx)

[1.36]
* Fixed targetfps system to work under linux
* Tested with DoD3 (works fine with me)

[1.35]
* sys_ticrate/targetfps system is now deactivated on listenservers!
* Setting "booster_targetfps 0" deactivates targetfps system (you can still use underrun mode with this)

[1.34]
* Trying to fix XP problems

[1.33]
* targetfps default value is now 133
* booster_maxsysticrate, booster_mixsysticrate cvars to
set maximum and minimum boundaries for target-fps system
* Small connection message is now default
* booster_underrun_scale changed to booster_underrun_finalrate (thanks to !2SX!)

[1.32]
* Booster's day off.. Sauna & Vodka

[1.31]
* sys_ticrate, sv_maxupdaterate are now visible in server info

[1.30]
* targetfps system for better function with 1.1.0.9

[1.21]
* [bugfix] Fixed (hopefully) current players counting

[1.20]
* Shows current map in connection message
* [bugfix] Now underrun even works  .. fixed current players counting

[1.17]
* [bugfix] rewritten underrun code

[1.16]
* Comes with Linux binary by default (LinHL-Booster)
* Added 'booster_small_connmsg' for those who don't want that big connection message ruin other messages
* Speed tweaks (this was in 1.15 already)
* [bugfix] Underrun works now even if force settings is enabled

[1.15]
* Changed connection message 'made by' to 'plugin-url' so that people stop email-asking me for url

[1.14]
* [bugfix] Removed "meta-interface version mismatch"-warnings

[1.13]
* Jumped over this version (I don't like number 13 )

[1.12]
* [bugfix] booster_forcesettings should work right way now.
* [bugfix] booster_underrun should work right way now.
* [bugfix] Current players on server counter function fixed.

[1.11]
* Added 'booster_forcesettings'
* [bugfix] Removed debugging message that I left in 1.10

[1.10]
* Added 'booster_underrun_on', 'booster_underrun_players' and 'booster_underrun_scale' cvars for servers with low bandwidth.

[1.02]
* Shows how many players are present on server to joining player.

[1.01]
* Small code tweaks

[1.00]
* -

希望大家能找到适合自己使用的版本 :boss:

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注个册吧

×
发表于 2004-8-4 20:42:32 | 显示全部楼层 来自 中国–广东–深圳
双“至强”处理器的服务器用哪个版的booster效果最佳?
回复

使用道具 举报

发表于 2004-8-4 21:01:07 | 显示全部楼层 来自 中国–吉林–长春
我是amd xp2500+
应该选哪个???????
回复

使用道具 举报

发表于 2004-8-4 23:07:49 | 显示全部楼层 来自 中国–河北–石家庄
p42.8c 用那个版本比较好??
回复

使用道具 举报

发表于 2004-8-4 23:49:11 | 显示全部楼层 来自 中国–北京–北京–海淀区
谁能说说这个booster在什么情况下有boost作用?
建服务器三年多了,没觉得这玩意儿真加了什么速了,除了在顶部有个xxx fps看着比较舒服以外。
回复

使用道具 举报

发表于 2004-8-5 00:09:48 | 显示全部楼层 来自 中国–广东–深圳–南山区
在我的服务器里,玩家的PING值降低15左右。

我用公司的光纤网络连到服务器时的PING值只有1、2左右!!,如果不用booster,这时PING值会变成十几,所以效果是比较明显的。
回复

使用道具 举报

发表于 2004-8-5 00:22:45 | 显示全部楼层 来自 中国–北京–北京–海淀区
看了看readme,原理很有道理的样子,装一个再试试。。。
回复

使用道具 举报

发表于 2004-8-5 10:13:25 | 显示全部楼层 来自 中国–广东–深圳
viva讲一下Booster_mm.dll和Booster_686_mm.dll哪个是用在amd上,哪个用在inter P4上的啊。。

我想是前者是P4的,对不?
回复

使用道具 举报

发表于 2004-8-5 12:33:19 | 显示全部楼层 来自 中国–福建–龙岩
我觉得是686 for P4的。
AMD直接就是 _amd_ 了。 :6:
回复

使用道具 举报

发表于 2004-8-5 14:21:46 | 显示全部楼层 来自 中国–黑龙江–黑河
哇~~
viva给说一下区别好不?
回复

使用道具 举报

游客
回复
您需要登录后才可以回帖 登录 | 注个册吧

快速回复 返回顶部 返回列表