发一个服务器限制玩家客户端命令插件

Sara · 发表于 2010-8-22 10:58:32

本帖最后由 Sara 于 2010-8-22 11:38 编辑

这个插件能限制服务器所有玩家在一定时间内无法使用某些命令

官方下载地址：http://forums.alliedmods.net/showthread.php?p=702586

使用插件版本：AMXX 1.80以上

使用方法：

在addons\amxmodx\configs\ 目录下创建 command_limit.txt 文本

文本内容：

// Format: command type [limit] [time] [access]=格式：[命令] [时间] [类型]
// type: cl, srv or con=类型：cl代表客户端，srv=服务器，con=代表服务器和客户端
// limit: how many times the command can be used before the counter is reset (by time, if specified, or on round end)=被限制时间内使用命令的次数
// time: Reset the command counter each (this) seconds=被限制的时间（秒计算）
// access: Limit only valid for users with this admin flags. Use '*' for everyone. Check users.ini for more info=可以对服务器users.ini拥有权限的人限制，要是是所有完家那么请选Z
//例如：限制客户端的玩家1分钟内只能执行amx_help一次，格式如下
amx_help cl 1 60 z

复制代码

翻译的不好请见谅

插件源码：

#include <amxmisc>
#define TASKID_COUNTER_RESET 1000
stock const iEmptyArray[33] = {0, ...}
new Array:hCommandArray
new Array:hLimitArray
new Array:hCountArray
new Array:hTimeArray
new Array:hLevelArray
public plugin_init()
{
register_plugin("Command Limiter", "1.1", "danielkza")
// This is cstrike only, but AFAIK, there's no universal alternative
register_logevent("RoundEnd_Event", 2, "1=Round_End")
register_concmd("cmd_limit_reload", "Reload_Command", ADMIN_RCON)
LoadConfig()
}
public plugin_end()
{
ArrayDestroy(hCommandArray)
ArrayDestroy(hLimitArray)
ArrayDestroy(hCountArray)
ArrayDestroy(hTimeArray)
}
public Reload_Command(id,level,cid)
{
if(cmd_access(id,level,cid, 1))
LoadConfig()
return PLUGIN_HANDLED
}
public RoundEnd_Event()
{
new iSize = ArraySize(hCountArray)
for(new i=0; i < iSize; i++)
ArraySetArray(hCountArray, i, iEmptyArray)
}
OpenFile(&iCreated = 0)
{
static szFile[64]
if(!szFile[0])
{
get_configsdir(szFile, charsmax(szFile))
add(szFile, charsmax(szFile), "\command_limit.txt")
}
new hFile = fopen(szFile,"r")
if(!hFile)
{
hFile = fopen(szFile,"w+")
if(hFile)
{
fprintf(hFile,
"// Format: command type [limit] [time] [access]^n\
// command: text of the command you want to be limited^n\
// type: cl, srv or con^n")
fprintf(hFile,
"// limit: how many times the command can be used before the counter is reset (by time, if specified, or on round end)^n\
// time: Reset the command counter each (this) seconds^n\
// access: Limit only valid for users with this admin flags. Use '*' for everyone. Check users.ini for more info.^n^n\
// Example: 'amx_help cl 1 60 z' - Non-Admin clients can only use amx_help one time each 60 seconds")
iCreated = true
}
}
else
iCreated = false
return hFile
}
LoadConfig(id = 0)
{
if(hCommandArray)
{
ArrayClear(hCommandArray)
ArrayClear(hLimitArray)
ArrayClear(hCountArray)
ArrayClear(hTimeArray)
ArrayClear(hLevelArray)
}
else
{
hCommandArray = ArrayCreate(1)
hLimitArray = ArrayCreate(1)
hCountArray = ArrayCreate(33)
hTimeArray = ArrayCreate(1)
hLevelArray = ArrayCreate(1)
}
new iCreated
new hFile = OpenFile(iCreated)
if(!hFile)
{
log_amx("[ERROR] Can't create/load command list file. Make sure 'command_limit.txt' exists on your configs folder, or that you have proper access.")
set_fail_state("Can't load command list")
return
}
else if(iCreated)
goto CloseFile
new szTemp[128], szLimit[8], szType[8], szTime[8], szLevel[32]
new cid
while(!feof(hFile))
{
fgets(hFile, szTemp, charsmax(szTemp))
if(!strlen(szTemp) || szTemp[0] == ';' || equali(szTemp, "//", 2))
continue
trim(szTemp)
if(!strlen(szTemp))
continue
parse(szTemp, szTemp, charsmax(szTemp), szType, charsmax(szType), szLimit, charsmax(szLimit), szTime, charsmax(szTime), szLevel, charsmax(szLevel))
if(!strlen(szTemp))
continue
new iLimit = str_to_num(szLimit)
if(!iLimit)
continue
new Float:fTime = str_to_float(szTime)
new iLevel = ADMIN_ALL
if(equali(szType, "srv"))
cid = register_srvcmd(szTemp, "Command_Handler")
else
{
if(equali(szType, "cl"))
cid = register_clcmd(szTemp, "Command_Handler")
else
cid = register_concmd(szTemp, "Command_Handler")
if(strlen(szLevel) && szLevel[0] != '*')
iLevel = read_flags(szLevel)
}
if(cid)
{
ArrayPushCell(hCommandArray, cid)
ArrayPushCell(hLimitArray, iLimit)
ArrayPushArray(hCountArray, iEmptyArray)
ArrayPushCell(hTimeArray, fTime)
ArrayPushCell(hLevelArray, iLevel)
if(fTime != 0.0)
set_task(fTime, "Command_Time_Task", cid+TASKID_COUNTER_RESET, _, _, "b")
}
}
CloseFile:
fclose(hFile)
new iCount = ArraySize(hCommandArray)
server_print("[AMXX] %d command limits loaded.", iCount)
if(is_user_connected(id))
console_print(id, "[AMXX] %d command limits loaded.", iCount)
}
public Command_Time_Task(cid)
{
cid -= TASKID_COUNTER_RESET
new iPos = ArrayFindInt(hCommandArray, cid)
if(iPos != -1)
ArraySetArray(hCountArray, iPos, iEmptyArray)
}
stock ArrayFindInt(const Array:hArray, const any:iSearch, const iStart = 0)
{
if(hArray)
{
new iSize = ArraySize(hArray)
for(new i=iStart; i < iSize; i++)
{
if(ArrayGetCell(hArray, i) == iSearch)
return i
}
}
return -1
}
public Command_Handler(id, level, cid)
{
new iPos = -1
while((iPos = ArrayFindInt(hCommandArray, cid, iPos+1)) != -1)
{
new iFlags = ArrayGetCell(hLevelArray, iPos)
if(access(id, iFlags))
{
new iLimit = ArrayGetCell(hLimitArray, iPos)
new iCount[33]
ArrayGetArray(hCountArray, iPos, iCount)
if(++iCount[id] > iLimit)
{
client_print(id, print_console, "[ERROR] You reached the limit of %d uses for this command. Wait a while before using it again.", iLimit)
return PLUGIN_HANDLED
}
ArraySetArray(hCountArray, iPos, iCount)
}
}
return PLUGIN_CONTINUE
}

复制代码

源码打包

Sara · 发表于 2010-8-22 11:22:08

沙发自己做，我服务器已经在用，2个月未出现任何状况。

欢迎大家测试

cs9527 · 发表于 2010-8-22 22:34:51

学习！顶拉！！！！

Sara · 发表于 2010-8-24 10:39:17

呵呵，相信很多人在找这个样的插件，怎么就没顶

9527欢迎你来作客哈

玮玮来啦 · 发表于 2010-8-25 01:49:50

楼主，这款插件主要在什么情况下使用？我一时没理解这插件的作用。

Caiiy · 发表于 2010-9-6 23:56:36

你不想让别人用你的插件

iam5362 · 发表于 2010-9-14 23:19:38

YEAH!! 强帖

decade · 发表于 2010-10-3 09:47:41

怎么我测试的命令无效啊

我的环境 cs1.5 amx1.81

我就测试amx_help cl 1 60 z

用非管理员账号进入游戏后刷新几十次都行、、

还有怎么样禁止一个命令？时间改成0 ？

Sara · 发表于 2010-10-3 21:47:40

8# decade

amx_help cl 1 60 z

amx_help不是刷新命令

你自己搞错了吧

是客户端玩家在控制执行 amx_help

laoklaole · 发表于 2010-10-13 09:34:11

中文中文中文

[AMXX 无源码] 发一个服务器限制玩家客户端命令插件

本帖子中包含更多资源